Today I am going to talk about the Cisco acquired Viptela SD-WAN solution. SD-WAN is one of the most demanding technology in the modern era and many of the enterprises or other segments are looking to deploy them in their environment to have a automatic workflows in their WAN networks.
What is the basic difference of the traditional vs SD-WAN solution approach ?
Well now a days OEMs trying to put the data plane and control plane separate. So if you are looking on the SD-WAN solution devices they are driven by the orchestration controller which has control plane and the physical devices only have the data plane.
With the help of controller all the policies, configurations are automated and pushed to physical devices. No need to have the CLI configurations on the devices as all will be taken care with the help of controller. That is the big difference which makes your work easy and save your time to configure the various devices in one go.
Here in this article, I will talk about the Cisco SD-WAN solution components. I already discuss about the basics of the Viptela SD-WAN solution.
Note : Viptela is acquired by Cisco and hence the solution name is Cisco SD-WAN solution.
What are the basic components of Cisco SD-WAN solution ?
Below are the four major components of the Cisco Viptela SD-WAN solution.
Basic Configuration of vEdge configuration
What is the basic difference of the traditional vs SD-WAN solution approach ?
Well now a days OEMs trying to put the data plane and control plane separate. So if you are looking on the SD-WAN solution devices they are driven by the orchestration controller which has control plane and the physical devices only have the data plane.
With the help of controller all the policies, configurations are automated and pushed to physical devices. No need to have the CLI configurations on the devices as all will be taken care with the help of controller. That is the big difference which makes your work easy and save your time to configure the various devices in one go.
Here in this article, I will talk about the Cisco SD-WAN solution components. I already discuss about the basics of the Viptela SD-WAN solution.
Note : Viptela is acquired by Cisco and hence the solution name is Cisco SD-WAN solution.
What are the basic components of Cisco SD-WAN solution ?
Below are the four major components of the Cisco Viptela SD-WAN solution.
 |
| Fig 1.1- Cisco Viptela SD-WAN components |
vBond – initiates the bring up process of every vEdge device, at the first step it creates secure tunnel with vEdge and informs vSmart and vManage about it’s parameters like for instance ip address. It has to be fully connected with every device.
vEdge – router which receive complete control and data policies from the vSmart, it is able to run routing protocol like OSPF, BGP to create connectivity on LAN side but also with MPLS provider if necessary. It establishes secure IPSec tunnels with others vEdges depending on selected topology.
vSmart – this is a controller for your network, it is responsible for managing all control and data policies by using special Overlay Management Protocol (OMP).
vManage – fully manageable centralized portal to run and operate software defined network (SD-WAN).
Basic Configuration of vEdge configuration
RouteXP_vEdge1000# show running-config
system
vbond ztp.viptela.com
aaa
auth-order local radius tacacs
usergroup basic
task system read write
task interface read write
!
usergroup netadmin
!
usergroup operator
task system read
task interface read
task policy read
task routing read
task security read
!
user admin
password XXXXXX
!
logging
disk
enable
!
!
!
omp
no shutdown
graceful-restart
advertise connected
advertise static
!
security
ipsec
authentication-type ah-sha1-hmac sha1-hmac
!
!
vpn 0
interface ge1/0
ip dhcp-client
tunnel-interface
encapsulation ipsec
no allow-service bgp
allow-service dhcp
allow-service dns
allow-service icmp
no allow-service sshd
no allow-service netconf
no allow-service ntp
no allow-service ospf
no allow-service stun
!
no shutdown
!
!
vpn 100
interface mgmt0
ip address 192.168.10.1/24
no shutdown
!
Basic vBond Configuration
vBond# show running-config
system
host-name vBond
gps-location latitude 40.7127837
gps-location longitude -74.00594130000002
system-ip 172.16.240.161
organization-name "Viptela Inc"
clock timezone America/Los_Angeles
vbond 11.1.11.14 local
aaa
auth-order local radius tacacs
usergroup basic
task system read write
task interface read write
!
usergroup netadmin
!
usergroup operator
task system read
task interface read
task policy read
task routing read
task security read
!
user admin
password encrypted-password
!
!
logging
disk
enable
!
!
vpn 0
interface ge1/0
ip address 11.1.1.14/24
no shutdown
!
ip route 0.0.0.0/0 11.1.1.1
!
vpn 100
interface eth1
ip dhcp-client
no shutdown
!